Issue 3 (feedback-pruebas): the prototype (t4:523/534/541) draws a
16px gap between the AUDIO/STATIONS/RECORDINGS/APPLICATION cards, not
12 -- a plain unwired literal that happened to collide with the
sectionGap/panelGap tokens' own value without actually citing the
prototype.
Audit 10.2 (t4:511): GrupoAjustes's eyebrow now sits OUTSIDE the
PluriGlassSurface, at title-tier (20px) padding -- it used to share
the card's own 16px content padding.
Audit 10.5 (t4:514/526): FilaAjuste gains an optional iconColor.
Wired on the two rows the prototype actually accents: AUDIO's
Ecualizador (brand cyan) and STATIONS' Grupos de favoritos (warmCoral).
Item 10.10 (two extra AUDIO rows -- "Calidad de streaming" and
"Reproduccion sin interrupciones") is NOT implemented: neither concept
has any backing state or service anywhere in this app today. Building
them for real means inventing two new persisted settings, and a
genuine streaming-quality preference would plausibly need to touch
the protected servicio_audio.dart to actually affect playback --
out of scope for a visual-fidelity pass. Decorative rows that open
nothing would be dead UI, which is worse than leaving the gap
disclosed.
The prototype puts a trailing current-value string on nearly every
settings row (t4 lines 512-539, 625 -- "3 guardados", "Alfabetico",
"Espanol", "7 . 84 MB"). FilaAjuste only accepted icon/titulo/onTap,
so every row was value-blind.
Add an optional `valor` slot to FilaAjuste (13px, rgba(242,247,250,.55),
rendered before the chevron). Wire 8 of the 12 built rows to state
already available at the settings root: equalizer on/off, sleep-timer
active, favourite-group count, preferred station name, custom-station
count, sort order, recordings count-and-size (FutureBuilder over
EstadoGrabacion.listarGrabaciones), and the current language (hoisted
pantalla_ajustes_idioma.dart's native-name list to module level so the
root can read it without duplicating it). Salida de audio, Musica
local, Backup and Info's version are left without a value -- each
lacks a low-risk, deterministically-testable data source (see the
apply-progress note for the reason per row).
Reading EstadoRadio for these values through a root `context.watch`
would rebuild the whole settings list -- including the Grabaciones
FutureBuilder's disk read -- on every unrelated audio notification;
this follows the codebase's existing S4-R5 convention of narrow
`context.select` per field instead.
Ajustes' own PluriRootHeader/PluriScreenHeader edit (S2 in this same
pass) landed in this commit too, since both touched the same header
block in pantalla_ajustes.dart at the same time.
S8, Tier 1 visual-fidelity pass (audit id 2521).
The prototype (t4) draws no global app bar anywhere: every root paints
a plain ~56px title row inside its own content instead (Alarmas line
325, Ajustes line 511, Explorar line 641). app.dart wrapped every tab
in PluriWaveScaffold(appBar: AppBar(title: Text(appTitle), ...)),
adding 56dp of chrome and a "PluriWave" title the prototype never
shows.
Add PluriRootHeader, a shared 56px title-row widget reused by all 5
roots. Extract app.dart's old _mostrarTimerDialog (only reachable from
the removed AppBar action) into a free function,
showPluriSleepTimerSheet, so every root's header can open the same
sheet directly and the sleep-timer feature stays reachable from every
tab with no behaviour change.
S1, Tier 1 visual-fidelity pass (audit id 2521).
WU15 shipped PantallaGrabaciones (the recordings library: storage bar,
recording rows, the "..." Rename/Share/Delete menu) fully tested but
reachable from nowhere in the app - a gap flagged in WU15's own
apply-progress notes, not fixed there since it needed a design
decision rather than a guess.
Coordinator ruling applied: the approved mockup's "Ajustes > Grabaciones"
screen depicts the library, not the folder/size settings form. So the
GRABACIONES Y MUSICA group's "Grabaciones" row in pantalla_ajustes.dart
now opens PantallaGrabaciones instead of PantallaAjustesGrabaciones.
The settings form is not dropped - it stays reachable, now from within
the library via a settings icon in its PluriPushScaffold actions,
matching the existing pantalla_ajustes_timer_sueno.dart "Add" action
precedent for a real capability living in the header.
One new ARB key (en/es only, per precedent): recordingsLibrarySettingsTooltip.
Tests: 604 -> 605 (one scenario re-targeted in pantalla_ajustes_test.dart,
one new scenario in pantalla_grabaciones_test.dart, which needed the
same ListTile-ink-assertion suppression helper WU3a/WU3b established
since it now pushes a ListTile-bearing settings screen). flutter
analyze unchanged at 1 pre-existing info.
Recorded in tasks.md as WU15b - not part of the original 18-unit plan,
added here to close the gap WU15 flagged.
Moves the AUDIO group (Ecualizador, Salida de audio, Temporizador de
sueno) and the EMISORAS group (Grupos de favoritos, Emisora preferida,
Emisoras personalizadas, Orden de listas) out of pantalla_ajustes.dart
into 7 new lib/pantallas/ajustes/*.dart screens, each wrapped in
PluriPushScaffold. The root now reaches them through FilaAjuste rows
under two new GrupoAjustes cards (lib/pantallas/ajustes/widgets/
fila_ajuste.dart), per design ADR-3.
Verbatim-move rule applied throughout: only each section's panel header
(icon + title, sometimes a status chip) was removed, since the pushed
screen's own 56px header now carries the title. Two sections whose
header row carried a real action (Temporizador de sueno's "Add",
Grupos de favoritos' "Add list", Emisoras personalizadas' "Add") kept
that action in the body instead of dropping it.
size:exception (move-only diff, pre-recorded at design/tasks time):
34 files, ~4250 changed lines excluding the 13 auto-regenerated l10n
files (~90 more lines there) - higher than the 800-1000 estimate
because that estimate covered the 7 production screens but not the
matching 7 new test files (task 3a.2), one of which relocates ~10
pre-existing device-management test cases verbatim. Business logic is
untouched; app.dart's import of pantalla_ajustes.dart is unchanged.
Correction to tasks.md 3a.1/3a.8: those two lines describe the combined
WU3a+WU3b end state ("4 grouped nav lists", "<400 lines"), matching
design ADR-3's own aggregate blast-radius note - not a WU3a-only claim.
This commit converts only the 2 groups that are WU3a's job; the root
is 788 lines with 5 sections (Grabaciones, Musica local, Idioma,
Backup, Info) still inline, reachable, and unchanged, pending WU3b.
Two new ARB keys (settingsGroupAudioTitle, settingsGroupStationsTitle),
en/es only per the WU1 precedent - all 7 detail-screen titles reuse
existing keys. Discovered and worked around, without touching app
code: Directory.systemTemp hangs real dart:io writes in this sandbox,
and pumpAndSettle() cannot settle while a screen shows an indeterminate
CircularProgressIndicator - both are test-only concerns, documented
inline where hit.
Tests: 560 -> 579 (32 in this commit's scope, net +19 after retiring
13 relocated cases from the old combined pantalla_ajustes_test.dart).
flutter analyze: unchanged at 1 pre-existing info. git diff is empty
for navegacion_auto.dart, servicio_ecualizador.dart and
servicio_audio.dart; pantalla_alarma_sonando_dismiss_guard_test.dart
untouched.
deviceToMap handed the builtin_speaker id to EVERY output type its `when`
did not name. A car stereo on LE Audio (TYPE_BLE_HEADSET) or an automotive
bus (TYPE_BUS) therefore arrived in Dart under the phone speaker's own id,
carrying a type that maps to `desconocido` -- which slipped past the
type-only esBase guard and persisted a device entry keyed builtin_speaker.
From that moment on, every playback through the phone's own speaker matched
that entry, so the green active-output dot stayed pinned to whatever the user
had renamed it to (a car, in the reported case) whether or not anything was
connected. The dot was never wrong; the row was poisoned.
Give unnamed output types their own `other:<type>:<address>` id namespace,
and match esBase by id as well as by type so no future native regression can
re-create the collision. A guarded one-time migration purges what the
collision already persisted from all three device-keyed maps.
Fix the ranking too: builtin_speaker sat inside the priority list as a peer,
so any type absent from that list sorted BELOW the always-present speaker
and could never win. The speaker is now the explicit last resort, externally
connected outputs outrank it, and virtual or call-only sinks (earpiece,
telephony, remote submix, SCO) are ranked below it so they can never be
reported as where music is playing.
Route every AudioDeviceInfo.getAddress read through a version-guarded
helper. It is API 28 with minSdk 24, and two pre-existing unguarded calls in
this same method were latent NoSuchMethodError crashes on Android 7-8.1.
Android lint for :app goes from 8 errors to 6.
Also lets the user manage the list, which is how they recover from a bad
entry without waiting for a release: a remove action clears a device's
preset, name and matrix entries, unnamed rows show their transport and
address tail instead of a raw bt_a2dp:AA:BB:... id, and the green dot
finally carries a tooltip and a semantics label saying what it means.
Device QA pending for wired and USB outputs: no jack or adapter available to
exercise those paths. Their detection is unchanged by this commit.
- MainActivity: onListen re-emits the current active device and registers
the audio device callback idempotently, so recreated activities resync
instead of freezing the active-device id on a disconnected device.
- servicio_dispositivo_audio: resubscribir() re-opens the event channel;
estado_ecualizador exposes refrescarDispositivoActual() with an
in-flight guard, invoked on app resume and when opening advanced EQ
options, clearing stale green-dot device selections.
- navegacion_auto/servicio_audio: new 'Personalizado' browse tree in
Android Auto (5 band folders, 13 gain steps each) applied live via
setBanda; preset and gain taps persist at device level when
multi-device EQ is active and respect station/matrix overrides,
with apply-before-persist ordering and children-changed notifications.
- l10n: regenerate stale generated localizations; add rxdart as direct
dependency for the subscribeToChildren override.
Folders over the 50-item cap now show a "Mas..." item that reveals
the next page on tap, instead of silently dropping the rest. Paging
slices the cheap raw list before building any MediaItem, so items
beyond the requested page are never resolved (art, title) -- proven
by a call-count test. Also swaps the raw SAF content:// URI shown in
settings for a parsed, human-readable folder name with a localized
fallback across all 13 locales.
servicio_audio.dart is untouched; this stays entirely within the
local-music tree/dispatch layer.
Phase 1: pick a device folder via SAF (persisted grant, no new
permission), browse its nested subfolders/tracks as a 5th Android
Auto root folder (hidden until configured), and play tracks through
the existing pipeline (EQ, art rotation, cold-start-safe source).
No metadata/sort/filter/shuffle yet -- filename is the title, generic
rotating art is the placeholder; deferred to a follow-up phase.
Adds a new pluriwave/file_actions native method (listAudioChildren)
and an onActivityResult override in MainActivity for the SAF folder
picker -- both static-review-only, no Android build available here.
Dart half of bt-device-identity. EstadoEcualizador now caches each
device's platform-reported name in memory so the settings screen
shows the device's own Bluetooth name instead of its raw id when no
custom rename exists, and skips auto-creating preset entries for the
composite-placeholder sentinel. Enabling multi-device EQ triggers the
Bluetooth permission request through the new channel contract. A
flag-guarded one-time migration purges only entries keyed by the
exact literal placeholder id from the three per-device preference
maps, since those collided entries cannot be attributed to a device.
Work unit 2/2 of bt-device-identity (Dart state + migration).
Fix multi-device EQ auto-switching by calling obtenerDispositivoActual()
during cargarPersistido() to seed the initial device ID. Add device
management modal with rename support, EQ preset editing, and connection
status indicator. Translate device UI keys to all 13 locales.
Introduce multi-device EQ support allowing each audio output device
(built-in speaker, wired, USB, individual Bluetooth by MAC) to have
its own equalizer preset, combined with existing per-station presets
for a full station×device matrix.
- Add DispositivoAudio model and ServicioDispositivoAudio interface
- Add Android platform channel (AudioDeviceCallback) for device detection
- Add iOS AudioDevicesPlugin (AVAudioSession route tracking)
- Extend ServicioEcualizador with device and matrix persistence keys
- Implement 4-level resolution: matrix > station > device > global
- Add advanced EQ settings section with feature toggle (off by default)
- Extend export/import to v3 with backward compatibility
- 184 tests passing, zero analyzer issues
- Replace all hardcoded Color literals outside lib/tema with theme tokens (new static brand palette in PluriWaveTokens); media notification uses the brand color instead of the Material default purple
- Favorite button on station cards grows to a 48dp target and becomes an independent semantics node for screen readers (Semantics container fix)
- All flutter_animate call sites route through the PluriAnimate reduced-motion gate (zero direct .animate() left)
- Locale-aware short dates via intl DateFormat (new lib/l10n/formato_fechas.dart) replacing the hardcoded DD/MM/YYYY; proper plural messages for the favorites counter; example stream URL as a localized key - all 13 locales
- Rounded shimmer placeholders matching card radii; shimmer loading state in search instead of a bare spinner; rounded icon variants unified in settings; bottom-sheet conventions on the custom station form
- Fix latent debug crash: vacation editor read AppLocalizations in initState
- 11 new tests (121 total green), flutter analyze clean
- New EstadoGrabacion owns the recording service, subscription, directory/size preferences and open-file actions
- New EstadoBusqueda owns search, nearby stations, pagination and the min-bitrate filter
- New orden_emisoras.dart with the OrdenEmisoras enum, shared sorter and list identity memoization so context.select comparisons work on derived lists
- Large screens (inicio, buscar, favoritos, ajustes, reproductor) consume scoped selects/dedicated notifiers instead of root context.watch<EstadoRadio>, so audio buffer events no longer rebuild whole screens
- Remove all 15 TODO(S4b) compat members from EstadoRadio; consumers use the dedicated providers. EstadoRadio drops from ~1121 to 753 lines, keeping playback/stations/favorites orchestration
- 8 new tests including a rebuild-scoping probe (110 total green), flutter analyze clean
- New ServicioExportImport owns the v2 backup envelope, pretty JSON encode and graceful decode; byte-compatible with existing exports, locked by a round-trip test
- pantalla_ajustes delegates backup serialization to the service (inline jsonDecode/jsonEncode removed)
- New EstadoEcualizador ChangeNotifier owns all EQ state and persistence (principal/current/per-station presets, active flag), exposed via its own provider so EQ changes no longer rebuild EstadoRadio consumers
- EstadoRadio slims down ~210 lines and keeps 15 delegating compat members marked TODO(S4b) for the next slice to remove
- Player EQ toggle rewired to the new provider to avoid going stale
- 4 new tests (103 total green), flutter analyze clean
- Added state management for startup retry and custom station handling in `EstadoRadio`.
- Created tasks for implementing strict TDD with RED tests for HTTP failure retries and EQ persistence.
- Developed verification report to ensure compliance with TDD practices.
- Introduced fake services for testing, including `FakeServicioAudio`, `FakeServicioFavoritos`, and `FakeServicioRadio`.
- Implemented widget tests for `PantallaInicio` and `PantallaFavoritos` to validate UI behavior with custom stations.
- Enhanced `ServicioRadio` to support host rotation and retry logic for API calls.
- Established a new configuration file to enforce project constraints and testing rules.
FreeTLab
Javier Bautista Fernández