Regression from the previous commit. Ranking every AudioDeviceInfo type this
build does not name individually ABOVE the built-in speaker was meant to let
a car stereo on LE Audio or an automotive bus win. It also promoted the
internal sinks a phone exposes permanently: on the Xiaomi test device
AudioManager reports TYPE_FM (14) as an output, so getActiveAudioDevice
picked it over the real speaker with nothing connected at all. Confirmed on
device:
audio_devices.onListen -> {id=other:14:4, type=14, name=2412DPC0AG}
It then reached Dart under an `other:14:4` id whose type is neither the base
speaker nor a known one, slipped past the collision guard and had a preset
row persisted for it -- reinstating the exact symptom this series set out to
kill: a permanent green active-output dot on a device that was not connected.
Replace the deny-by-omission ranking with an explicit allow list of outputs a
user actually connects. The built-in speaker sits below all of them and above
everything else, so any sink that physically exists but is never where media
plays (TYPE_FM, TYPE_BUILTIN_SPEAKER_SAFE, telephony, remote submix) can no
longer be selected. A one-time purge clears the `other:` rows the bad build
persisted; genuine ones re-register on their next connection.
Fix the USB type constant while here: TYPE_USB_HEADSET is 22, not 14, and 14
is TYPE_FM. The Kotlin USB branch hardcoded 14 and the Dart type table
mirrored the same mistake, so the two cancelled out for real USB headsets
while making a phone's own FM sink decode as USB audio. Both now use 22.
Verified with javap against android.jar (android-36) rather than trusting the
comment that introduced the error.
A Bluetooth device only reports its own name through
AudioDeviceInfo.productName while it is enumerated as an active output, i.e.
while it is connected. Paired-but-switched-off devices therefore had no name
to fall back on, and the platform-name cache is in-memory only by design
(bt-device-identity ADR-4), so it self-heals per session ONLY for whatever
happens to be connected. Every other device showed its raw id.
Android already knows those names: BluetoothAdapter.getBondedDevices() lists
every pairing with its name and MAC, connected or not, and nothing in this
app was asking. Read it and seed the platform-name cache from it, keyed
bt_a2dp:<uppercase MAC> to match the ids the audio layer emits.
Seeded BEFORE the active-device query so a live enumeration name, being the
fresher of the two, still wins; a user's custom name outranks both. Re-read
on refrescarDispositivoActual so pairing or renaming a device in system
settings shows up as soon as the list becomes visible.
Reading the bond list is gated by BLUETOOTH_CONNECT from API 31 and by the
legacy BLUETOOTH permission below it, so declare the latter with
maxSdkVersion 30. It is a normal permission: granted at install, no runtime
prompt, no new friction. When the answer is unavailable — permission denied,
no adapter, Bluetooth off — both layers return an empty map rather than
throwing, and the row degrades to the id exactly as before.
Does not help rows persisted under a bt_a2dp:name: placeholder id: those
never had a MAC to match against.
deviceToMap handed the builtin_speaker id to EVERY output type its `when`
did not name. A car stereo on LE Audio (TYPE_BLE_HEADSET) or an automotive
bus (TYPE_BUS) therefore arrived in Dart under the phone speaker's own id,
carrying a type that maps to `desconocido` -- which slipped past the
type-only esBase guard and persisted a device entry keyed builtin_speaker.
From that moment on, every playback through the phone's own speaker matched
that entry, so the green active-output dot stayed pinned to whatever the user
had renamed it to (a car, in the reported case) whether or not anything was
connected. The dot was never wrong; the row was poisoned.
Give unnamed output types their own `other:<type>:<address>` id namespace,
and match esBase by id as well as by type so no future native regression can
re-create the collision. A guarded one-time migration purges what the
collision already persisted from all three device-keyed maps.
Fix the ranking too: builtin_speaker sat inside the priority list as a peer,
so any type absent from that list sorted BELOW the always-present speaker
and could never win. The speaker is now the explicit last resort, externally
connected outputs outrank it, and virtual or call-only sinks (earpiece,
telephony, remote submix, SCO) are ranked below it so they can never be
reported as where music is playing.
Route every AudioDeviceInfo.getAddress read through a version-guarded
helper. It is API 28 with minSdk 24, and two pre-existing unguarded calls in
this same method were latent NoSuchMethodError crashes on Android 7-8.1.
Android lint for :app goes from 8 errors to 6.
Also lets the user manage the list, which is how they recover from a bad
entry without waiting for a release: a remove action clears a device's
preset, name and matrix entries, unnamed rows show their transport and
address tail instead of a raw bt_a2dp:AA:BB:... id, and the green dot
finally carries a tooltip and a semantics label saying what it means.
Device QA pending for wired and USB outputs: no jack or adapter available to
exercise those paths. Their detection is unchanged by this commit.
- MainActivity: onListen re-emits the current active device and registers
the audio device callback idempotently, so recreated activities resync
instead of freezing the active-device id on a disconnected device.
- servicio_dispositivo_audio: resubscribir() re-opens the event channel;
estado_ecualizador exposes refrescarDispositivoActual() with an
in-flight guard, invoked on app resume and when opening advanced EQ
options, clearing stale green-dot device selections.
- navegacion_auto/servicio_audio: new 'Personalizado' browse tree in
Android Auto (5 band folders, 13 gain steps each) applied live via
setBanda; preset and gain taps persist at device level when
multi-device EQ is active and respect station/matrix overrides,
with apply-before-persist ordering and children-changed notifications.
- l10n: regenerate stale generated localizations; add rxdart as direct
dependency for the subscribeToChildren override.
Dart half of bt-device-identity. EstadoEcualizador now caches each
device's platform-reported name in memory so the settings screen
shows the device's own Bluetooth name instead of its raw id when no
custom rename exists, and skips auto-creating preset entries for the
composite-placeholder sentinel. Enabling multi-device EQ triggers the
Bluetooth permission request through the new channel contract. A
flag-guarded one-time migration purges only entries keyed by the
exact literal placeholder id from the three per-device preference
maps, since those collided entries cannot be attributed to a device.
Work unit 2/2 of bt-device-identity (Dart state + migration).
Introduce multi-device EQ support allowing each audio output device
(built-in speaker, wired, USB, individual Bluetooth by MAC) to have
its own equalizer preset, combined with existing per-station presets
for a full station×device matrix.
- Add DispositivoAudio model and ServicioDispositivoAudio interface
- Add Android platform channel (AudioDeviceCallback) for device detection
- Add iOS AudioDevicesPlugin (AVAudioSession route tracking)
- Extend ServicioEcualizador with device and matrix persistence keys
- Implement 4-level resolution: matrix > station > device > global
- Add advanced EQ settings section with feature toggle (off by default)
- Extend export/import to v3 with backward compatibility
- 184 tests passing, zero analyzer issues
FreeTLab
Javier Bautista Fernández